Health Protection Agency tested Air Sampler

AES CHEMUNEX Sampl'air ® yet ISO 14698-1 validated

Sampl'air® is a high performance but affordable impaction based air sampler for the monitoring of airborne contaminants.

Its performance has been evaluated according to the ISO 14698-1 standard by the UK Health Protection Agency (HPA) in Porton Down. The Institute said in its conclusion that: “The results of the physical testing of the Sampl’air® obtained were very consistent and the standard deviations were of a low order for aerobiological studies. The Sampl’air ® was found to be efficient (115.9%- 138.5%) for collecting particles containing bacterial cells in the size range 2.5- 12.5 μm compared to membrane filters. The efficiency of the Sampl’air® for lower particle size (0.8- 1.3μm) was found to be excellent (60.5- 66.2%).This suggest that the d50, the particle diameter at which the sampler efficiency drops below 50%, is approximately 0.5 μm. The percentage of microbiological particles found in indoor environments at this particle size is extremely low and therefore the Sampl’air should be capable of collecting over 99% of particles occurring in this environment.

Download some microbial air sampler testing report extracts

 

 

 

| accurate and reproducible microbial air sampling | traceability | confortable use | robustness | specifications | culture media |
| home | more information | about AES CHEMUNEX | contact | ISO validation | service & calibration | FAQ |